Printer Operator Panel Actions; Media Types And Sizes On The Printer - Oce TDS860 User Manual

Printer operator panel actions

On the Océ TDS860 printer operator panel you can perform a number of
actions:
Set the media type
Set the media type for manual feed
Set the media size
Set a special media indication
Stop a print job
Select the preferred languages
Clean the reinforcement knives

Media types and sizes on the printer

One of the features of the Océ TDS860 printer is the automatic media change
function. This function enables the printer to switch to another roll of the same
media when there is not enough media on the current roll to finish the print run.
Specify media type and the media size after you load media, as described in
'Maintenance' on page 247. The Océ TDS860 supports both DIN and ANSI
media formats.
See '' on page 301 for an overview of all materials that can be used on the Océ
TDS860 Printer. See'Overview of paper series' on page 307 for formats
included in the paper series.
38 Océ TDS860 User Manual