Oce TDS860 User Manual page 130

Instead of performing steps 2 and 3 you could also enter "ftp
Note:
host_name" in the FTP client.
The connection with the Controller is now established and a window appears
asking you for a user name.
Enter your user name 'anonymous', and enter as your password also
4
'anonymous'.
A connection is now set up for the default user 'anonymous'.
As there is no registered user, you can simply press Enter to initiate
Note:
the connection.
Set the transmission mode to binary by entering 'binary'.
5
Go to the 'tempstore' directory using the following command: 'cd tempstore\'.
6
Go to the 'scan' directory if you want to retrieve a file from a destination on
7
the local host,
or
go to the 'unsent' directory if you want to retrieve a file from 'unsent' folder
on the local host.
Get the data file (for example: bugatti.tif) via the 'get' command:
8
'get bugatti.tif'.
Quit FTP by entering the 'bye' command.
[70] The ftp directories on the Océ TDS860
130 Océ TDS860 User Manual