Making A Scan-To-File On The Océ Tds600 Scanner - Oce TDS860 User Manual

Making a scan-to-file on the Océ TDS600
scanner
Do the following to scan an original to file.
How to scan to file
Place your original face-down, right aligned along the original guide.
1
Select the appropriate original type.
2
Select the 'Destination' card in the 'File' section.
3
[51] 'Destination' card in the file section
Press the section key 'File', to select 'File mode' On.
4
The status message displays: Ready to scan to file.
Select a Destination (see 'Destinations' on page 121).
5
Press the start key
6
The original is scanned.
A status message displays (see Figure 52 on page 111):
"Scanning job "Scan job number X""
"File scan22.tif"
110 Océ TDS860 User Manual
.