Scan clicks
The Océ TDS860 measures the area of media that you scanned during scan to
file operations. You view the scan click count in the bottom right corner of Océ
Scan Manager (see Figure 47 on page 107).
The scan click count is measured in square feet or square meters (see 'Find
system settings in the Settings Editor' on page 187). You set the measurement
unit in the Océ Settings Editor (see chapter , 'Measurement' on page 133).
[47] Scan click count in Océ Scan Manager
Using the Océ TDS860 to scan-to-file
107