Interrupt A Job - Oce TDS860 User Manual

Interrupt a job

Press the Job interrupt key on the scanner panel to give extra priority to a copy
job. When you press the Job interrupt key your copy job will be placed on top
of the printing queue. When you select Job interrupt a message appears on the
scanner panel display (see 'Feedback on the scanner panel display when Job
interrupt is selected.' on page 99).
Interrupt
Access to
job
Page
[46] Feedback on the scanner panel display when Job interrupt is selected.
The print process will be interrupted after the current page is printed. The
transport of originals on the scanner will not be interrupted.
How to interrupt a copy job
Press the Job interrupt key on the Scanner operator panel.
1
The printer interrupts the active job and stops after the current page is printed.
The Océ Queue Manager displays the interrupt job in the print queue at the
active job position.
The Océ Queue Manager displays the interrupted job with the icon
The Océ Queue Manager displays the interrupt job with the icon
The Océ Queue Manager changes the exit interrupt button from gray into
colored and changes this button into the active condition.
Make copies (see page 87).
2
Press the Job interrupt key again to do another interrupt job.
3
Press the Exit interrupt button at the Océ Queue Manager to continue with the
interrupted job and collect the output at a later time.
Collect the output and press the Exit interrupt button at the Océ Queue
Manager to continue with the interrupted job.
An interrupt job cannot interrupt another interrupt job.
Note:
Using the Océ TDS600 scanner to copy
Access to
ial
.
.
99