User Interaction - Oce TDS860 User Manual

Océ Matrix logic®
you to form, in one single operation, different copy sets from one set of
scanned originals
introduction' on page 160.
Spool memory
queuing system for documents you want to print or copy. The spool memory
allows multiple users to send print and copy jobs to the Océ TDS860 at the
same time. The print and copy jobs are then placed in the print queue where
they wait to be printed. The job that is put into the queue first is printed first.
The system can be set up to give priority to either print or copy jobs.
Job recovery
safeguards users against data loss in case of a printer failure. After a restart, the
data submitted to the printer before the crash is automatically processed and
printed. This means that jobs do not have to be re-submitted after a printer
malfunction. This saves valuable time for the users.
Green key principle
scanner in particular is very easy to operate. Basic copy jobs can be performed
by simply pressing the green start key on the scanner operator panel. You have
to change the default copy settings with the help of the other settings on the
scanner operator panel only if you want to perform more complex copy jobs.

User interaction

The user can communicate with the Océ TDS860 both local on the system and
from remote locations:
Operator panels
a wide variety of settings for printing and copying. See 'Printer operator panel'
on page 34, 'Scanner operator panel' on page 47 and 'Scanner operator panel'
on page 75 for more information.
Controller applications
making default key operator and system administrator settings (Océ Settings
Editor). For viewing the status of the jobs in the print queue, you use the Océ
Queue Manager. The Océ System Control Panel shows the status of the entire
system.
Océ Scan logic®
for scan to file. See 'Océ Scan Logic®' on page 106 for more information.
16 Océ TDS860 User Manual
Océ Matrix Logic
using predefined settings. See
The Océ TDS860 contains a spool memory which provides a
The Océ TDS860 is equipped with a job recovery function that
The Océ TDS860 is a very user-friendly system. The
The Océ TDS860 consists of two operator panels for making
The Océ TDS860 controller applications are used for
With 'Océ Scan logic
is an Océ TDS860 option which allows
®
'Océ Matrix Logic®
' you can define all relevant settings
®