Oce TDS860 User Manual page 24

Turn the Océ TDS860 printer on and off
Turn the key to the 'on' position (see figure 2).
1
The system takes about 20 minutes to warm up. When the system is warmed
up, the message 'Ready to...' appears on the printer operator panel.
Turn the key to the 'off' position (see figure 2).
2
Before you turn the printer off, make sure that the printer is not
Note:
printing a job.
[3] Power switch with key in the timer position on the Océ TDS800 scanner
Turn the Océ TDS800 scanner on and off
Turn the key to the 'on' position (see figure 3)
1
After a few seconds the message 'Ready to print' appears on the scanner
operator panel.
Turn the key to the 'off' position (see figure 3).
2
[4] On / off switch on the Océ TDS600 scanner
24 Océ TDS860 User Manual
off
timer
on