Oce TDS860 User Manual page 49

The orange key marked with C is located at the bottom of
The Correction key
the central section of the operator panel. Press the Correction key one time to
reset the selected setting to its default value. Press the Correction key two times
to reset the numeric display to '1'. Press the Correction key three times to
return to the first screen on the display.
Press this red key to Stop the job. For more information see
The Stop key
'Stopping a job' on page 68.
You use the Job interrupt key to set high priority to your
The job interrupt key
copy job and to interrupt the printing of a running print or copy job. Determine
the high priority of your copy job with the Job interrupt key before you scan
your originals. The job is placed on top of the printing queue in the queue
manager. The interrupt job will start running directly after the current printing
page is completed.
The keys with numbers on the lower part of the middle
The Numeric keys
operator panel are used to specify numbers. Values you can set with the
numeric keys include: the number of copies or sets up to a maximum of 999,
zoom factor, user id, and account id.
Displays the number of sets or copies set with the
The 'numeric display
numeric keys.
Use the green Start key to start the feeding of the original, to
The Start key
restart the scan process, or for other purposes such as to mark the end of a set.
Using the Océ TDS800 scanner to copy 49