Oce TDS860 User Manual page 25

Turn the Océ TDS600 scanner on and off
Set the On / off switch at the front of the scanner to position '1'(see figure 4)
1
The green LED turns on.
The message 'Ready to scan' displays.
Set the On / off switch at the front of the scanner to position '0'.
2
[5] Power button on the Océ Power Logic
Start up the Océ Power Logic Controller
Turn he controller and the screen on.
1
After the initial system test of the controller the applications, Océ Queue
Manager, Océ System Control Panel, Océ Settings Editor and Océ Scan
Manager are automatically started and the controller applications are ready for
operation.
The Océ Settings Editor is minimized to save screen estate.
Note:
Take the following actions to turn the controller off:
Turn off the Océ Power Logic® Controller
Go to the Océ System Control Panel application.
1
Select the 'Shutdown' option from the 'System' menu.
2
Confirm shutdown by clicking on the 'Yes' button in the 'Shut down' window.
3
The system automatically performs the shutdown procedure for the controller.
Finally, the Windows 'Shutdown Computer' window displays, which informs
you that you can turn your computer off.
You can now restart the controller by pressing the 'Restart' button.
Wait at least 5 seconds before you restart the Océ TDS860.
Note:
Turn your computer and display off.
4
Introduction
®
Controller
25