Counter; Keys - Oce TDS860 User Manual

Counter

On the operator panel of the Océ TDS860 Printer a counter will be displayed
that gives the user feedback about the progress of the job that is currently being
printed. The counter, which is located at the bottom of the upper window on
the operator panel, displays the number of sets and the pages printed. Counting
starts at 1. The following options are available:
When no sets are made, only the current page and the total number of pages
are displayed (e.g. 'Page 3 of 5'). At the beginning of a job, when the system
does not know the total number of pages yet, only the current page may be
displayed (e.g. 'Page 5').
With set input: set counter. In this case the counter shows the current, the
total number of sets and the current page (e.g. 'Set 3 of 5, Page 10'). At the
beginning of a job, when the system does not know the total number of sets
yet, only the current set and page may be displayed (e.g. 'Set 2, Page 5').
With set input: multiple sheet counter. In this case the counter shows the
current page, the total number of pages and the current copy, e.g. 'Page 2 of
12, Copy 5'). At the beginning of a job, when the system does not know the
total number of pages yet, only the current page and copy may be displayed
(e.g. 'Page 2, Copy 5').
With set input: Océ Matrix logic®. In this case the counter shows the current,
the total number of sets and the current page (e.g. 'Set 3 of 5, Page 10'). At
the beginning of a job, when the system does not know the total number of
sets yet, only the current set and page may be displayed (e.g. 'Set 2, Page 5').

Keys

With the keys on the operator panel you can make a number of settings for the
Océ TDS860 Printer, such as the media type and size or the preferred language.
36 Océ TDS860 User Manual