Settings On The Océ Tds600 Scanner Operator Panel - Oce TDS860 User Manual

Settings on the Océ TDS600 scanner operator panel
When job templates are enabled in the Océ Settings Editor, the job templates
are displayed on start-up of the Océ TDS800 scanner (see Figure 30 on
page 80). When job templates are not enabled in the Océ Settings Editor, the
'Custom' card is displayed on start up (see Figure 27 on page 75).
The custom section
Editor. This contains a number of settings which are direct accessible. The key
operator defines the custom section in the Océ Settings Editor
How to make settings
Select a template (only applies when job templates on the scanner operator
1
panel are enabled in the Océ Settings Editor).
Press one of the Section keys to activate the desired menu.
2
The active menu is slightly moved downwards to visually separate it
Note:
from the other menus. Apart from that, a shadow highlighting effect is used
for extra highlighting.
Press the Card selection key to select the appropriate card. You can switch
3
cards (from bottom to top) by pressing the key again.
Here, too, the active card is visually separated from the other cards
Note:
and given a shadow highlighting effect for extra highlighting.
Select the desired function values in one of the following ways:
4
Simple (non-numeric) selection: press the Function key to activate the
desired (non-numeric) value. The selected value is preceded by a ' ' symbol.
Long list selection: if you want to select a value from a list of options that
cannot be fully displayed on the panel, you first activate the selection
triangles next to the specified option (the dotted line around this selection is
changed into an uninterrupted line and the selection triangles are no longer
dimmed), which indicate that there are additional options available and then
select one of the non-displayed values with the Arrow keys. The 'Original
type' setting demonstrated in figure 31 on page 81 is an example of this.
Numeric selection: activate the selection triangles and select the desired
value with the arrow keys or with the numeric keys.
Also a combination of simple selection and numeric selection is possible.
84 Océ TDS860 User Manual
gives access to the settings you defined in Océ Settings