How To Use The Remote System - Oce TDS860 User Manual

How to use the remote system

Start up the Océ Remote Logic applications (Océ Settings Editor, Océ Queue
manager, Océ System control panel), on a remote client after you installed the
software (see 'Installation procedure for Microsoft® Windows systems' on
page 205). In order to use the functionality you first have to add an Océ
TDS860 system and then connect to an available Océ TDS860 system.
Add an Océ TDS860
Open the 'File' menu and select 'Connect to'.
1
A dialog box will appear with a drop-down list box containing the already
added Océ TDS860 systems.
Click 'Edit...'. The 'Edit systems' dialog box appears.
2
Enter the IP address or the name of the Océ TDS860 system you want to
3
connect to, in the 'Systems' text box.
Click 'Add'. The system is added to the list. You can add as many systems.
4
You can also remove an Océ TDS860 system. Select one in the list and
Note:
click 'Remove'.
Click OK twice to return to the application.
5
Before you can add an Océ TDS860 system, the system has to be
Note:
installed and configured by a system consultant or a technician.
Connect to an Océ TDS860 system
Open the 'File' menu and select 'Connect to'.
1
A dialog box will appear containing a drop-down list box with the available
Océ TDS860 systems.
Select one of the available Océ TDS860 systems and click on 'OK'. When you
2
connect to another system, all settings have to be retrieved. This may take some
time.
Océ Power Logic®: Remote Logic 217