Manage The Temporary Store - Oce TDS860 User Manual

View properties of a scanned file
Select a file in the right pane.
1
Open the 'File' menu and select 'Properties' or click the 'Properties' button on
2
the toolbar (see figure 67).
[67] 'Properties' button on the toolbar.
The following window appears (see ''Scanfile properties' window' on
page 128):
[68] 'Scanfile properties' window
Click Ok to close the 'Scanfile properties' window.
3
Automatically view a file after scanning
You can choose to view a file automatically after scanning:
Open the 'System' menu and select 'Auto view'.
1
When you scan-to-file, Océ View Station LT will start automatically and show
the scanned file.

Manage the temporary store

When you regularly scan originals to a file, many files are created in the
temporary store. You can clean up the temporary store manually or
automatically.
To manually delete
command from the 'System' menu.
To automatically delete
configure disk cleanup in the Océ TDS860 Settings Editor to use this option.
(see 'Find system settings in the Settings Editor' on page 187).
128 Océ TDS860 User Manual
the files in the temporary store, select the 'Purge'
the scanned files from the temporary store, you must