Oce TDS860 User Manual page 166

The ' Matrix composition' window now contains the configurations selected
for the matrix job. The user may want to make changes to any particular
configuration selected for this job. This can be done in the edit window.
Modify configurations from the Matrix Composition window
From the Matrix Composition section, highlight the configuration to modify.
1
The settings are displayed.
Click the setting to modify. The value of the setting is displayed in the 'Edit'
2
field.
Change the value.
3
Repeat steps 2 and 3 for every setting to modify.
4
When editing a configuration, the change is not permanent. The
Note:
original settings for that configuration are not changed. They are only
changed for the Matrix job being printed at that time.
Print the Matrix Job (see 'Print the Matrix job' on page 167).
5
166 Océ TDS860 User Manual