Basic Job Settings
9.1.6
Copying Non-Standard Size Original: Custom Size
The machine usually detects the standard size of the original fed through the
ADF or positioned on the original glass (Standard Size mode).
Use the Custom Size mode to specify the desired standard size as scanning
area irrespective of actual size of the original.
Prerequisites
The scanning area can be selected from standard sizes, input size, and full
area.
0 Standard sizes: 11" × 17" w, 8.5" × 14" w, 8.5" × 11" w/v,
5.5" × 8.5" w/v, A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v
0 Full area: Use this function for small originals that cannot be detected in
Standard Size mode.
1
Position the original.
–
For details on positioning the original, see page 8-8.
2
Touch [Original Setting] on the Copy Screen.
The Original Setting Screen will be displayed.
3
Touch [Custom Size].
The Custom Size Screen will be displayed.
VarioLink 9522
9
9-13