Select The Required Media - Oce TDS860 User Manual

Select the required media

The 'Media' setting can be used to select media and format. The display will
show you what media rolls are currently loaded. If you select 'Automatic', the
Océ TDS860 will try to use a roll that matches the original size. After inserting
the original, the roll that is used is indicated by a LED that is on.
The LED remains on until a new original is inserted.
Note:
Select the media type and paper series on the scanner operator panel. First
select the paper series, then select the media size. Only the media in the defined
paper series are available.
(see table on page 307).
Attention:
printer can cause information loss on the output.
Select the paper series
Select the 'Sheet' card in the 'Original' section
1
Select the required paper series with the 'Paper series' function key
2
interrupt
Access to
job
Page
[19] Select the required paper series
Selecting the required media
Select the one of the six rolls on the scanner operator panel.
1
The corresponding LED turns on.
62 Océ TDS860 User Manual
Selecting another paper series than is actually loaded on the
Access to
ial