Function Buttons - Oce TDS860 User Manual

Preference menu (continued)
Command
Reference
Detail
Measurement
Help menu
Command
About

Function buttons

Below the menu's there are function buttons in a ribbon. This ribbon can be
turned on and off (see 'View ribbon' on page 132).
1
[72] Function buttons in Océ View Station LT
Figure 72 displays the buttons:
Invert: Reverses the black and white parts of the image.
1
Fit: Scales the image to fill the window.
2
1:1: Displays the image at a 1:1 scale factor.
3
Magnify: Zooms into the page.
4
Reduce: Zooms out of the page.
5
Mirror: Mirrors the image.
6
Rotate 90 CCW: Rotates the image 90 degrees counterclockwise.
7
Rotate 90 CW: Rotates the image 90 degrees clockwise.
8
Rotate 180: Rotates the image 180 degrees.
9
Measurement When active, allows you to measure lines and areas on the
10
image.
Reference. This small floating window displays the entire current page in
11
miniature for reference.
Displays or removes the Detail window.
12
Using the Océ TDS860 to scan-to-file
What does it do
Reference displays or removes a small, usually floating window.
This window displays the entire current page in miniature. The
crossed box inside the Reference window indicates which part of
the page is displayed in the document window.
By moving or resizing the crossed box, you change which area of
the page is displayed.
Displays or removes the Detail window.
When active, it allows you to measure lines and areas on the
image.
What does it do
Shows information about Océ View Station LT.
2 3 4 5 6 7 8 9 10 11 12
133