Specifying A Non-Standard Paper Size (Custom Size Settings) - Oce CS193 User Manual

7
– If "A6Cardw" is selected, "Thick 3" is automatically selected. If paper other than postcards are
loaded, change the paper type setting. For details on the paper type settings, refer to "Specifying a
setting for special paper" on page 7-17.
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
The paper size for the bypass tray is set.
Reminder
If paper other than the specified paper size is loaded, a paper misfeed may occur since the paper size
is not automatically detected.
!
Detail
For tray 2, "12-1/4 e 18 w" is available.
7.2.3

Specifying a non-standard paper size (Custom Size settings)

Non-standard-sized paper can be loaded into the bypass tray.
If wide paper is loaded, it will be necessary to enter the paper size.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Select the button for the bypass tray.
7-10
Copy paper/originals
CS193/CS173/CS163