Make Copies - Oce TDS860 User Manual

Make copies

Place your original face-up, left aligned along the original guide. Keep the
1
legend at your left hand side.
When you feed the original, keep it in place until it is transported
Note:
(about 1 cm) into the machine.
[18] Insert the original
Specify the number of copies using the numeric keys.
2
Specify the 'Paper series' on the 'Sheet' card in the 'Original' section.
3
Specify the desired media on the operator panel.
4
If you select 'Automatic' the Océ TDS860 will try to use a roll format that
matches the specified size.
Select a specific roll to use the media you want.
If you select 'Automatic', the Océ TDS860 will use a zoom factor that is
needed to obtain a copy without loss of information. After inserting the
original, the zoom factor that is used is indicated by the ' ' symbol.
The zoom factor is based on the selected media size.
Note:
Specify the desired brightness on the operator panel.
5
You can use the 'Brightness' setting to correct for a lighter or darker original.
Specify a reduction or enlargement factor on the operator panel by using the
6
'Zoom' function.
Specify folding options on the operator panel.
7
If the optional folder is installed, you can use the 'Folding' settings to get a
neatly folded copy.
Press the green start key to start the copy job.
8
Your original will be fed into the scanner. The printer starts.
Collect your output.
9
Your copy will be delivered on the selected output unit of the print engine.
Using the Océ TDS800 scanner to copy 61