Oce TDS860 User Manual page 276

[178] The crank
If the paper keeps coming, it is not cut and you have to cut it manually.
8
Cut the paper and turn the crank to the right to deliver the paper.
9
Remove the crank and return it to its original position.
10
Pull the handle 1 towards you to open the pre-heater section (see Figure 179 on
11
page 276).
Pull the green handle 2 toward you and release handle 1 (see Figure 179 on
12
page 276).
Pull the green bar 3 toward you (see figure 179).
13
[179] The pre-heater section
Close as follows:
Push the bar 3 back.
14
Press the handle 1 downwards.
15
Press the handle 2 back.
16
Close the bar of the fuser section.
17
Close the lower cover of the output unit.
18
276 Océ TDS860 User Manual
1
3
2
2
1
3