Unit Setting; Feed Tray Setting \ 01 Paper Setting - Oce CS655 Pro Administrator's Manual

5
5.2.2

02 Unit Setting

Select the unit of measurement for the value to be entered by user and to be displayed on the touch panel.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [01 System Setting], [02 Unit Setting] in sequence.
3
Select the desired unit key to highlight it.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
5.2.3

03 Feed Tray Setting \ 01 Paper Setting

Please refer to "2 Paper setting" for the overview of, and instruction on, setting paper.
5-6
User setting
CS655 Pro