4
4.1.3
Loading Paper in Large Capacity Unit (Tray 4)
If you want to use another paper than loaded in the tray 4, change the setting
of the tray 4. See page 9-44 for details.
To load paper in large capacity unit (tray 4)
0 Without the power turned on, the tray bottom plate will not function. Be
sure to turn on the sub power switch before loading paper in the tray.
1
Open the tray top door.
–
The tray bottom plate will
go up.
–
To load the same size as
loaded before, proceed
to step 6.
If changing the paper
size, proceed to the next
step.
2
Remove the paper guide knob (lower).
–
Open the left side door.
–
Turn the paper guide knob (lower) counterclockwise to loosen it,
then remove the knob.
LU-407
4-8
Supplies & Handling
LU-408
VarioLink 9522