Installing A Hard Disk Drive - Xerox DocuColor 4 Administrator's Manual

To reassemble the DocuColor 4 LP/CP:
Align the side panel clips with the holes in the connector bracket on the
back of the DocuColor 4 LP/CP. Close the side panel.
Replace the two screws on the side panel, then replace the two screw
covers.
Close the front panel and manual feed tray.
Plug in the power cord and reconnect any cables to the back of the
printer/copier.
B.2

Installing a hard disk drive

The following section explains how to install the hard disk drive for the
DocuColor 4 LP/CP video controller board. It also describes how to initial-
ize the new hard disk drive for use from the printer's front panel.
To install the hard disk drive you will need to access the video controller
board, install the drive and then reassemble the DocuColor 4 LP/CP.
Kit contents
• Hard disk drive
• Hard disk bracket (attached to the hard disk drive)
• Hard disk drive ribbon cable
To avoid electric shock ensure your hands are dry before touching the
printer's power plug.
B Available Options
A
127