Loading Discs; Changing The Default Settings - Denon DVD-A11 Operating Instructions Manual

ENGLISH
7

LOADING DISCS

2 Set discs in the disc tray with the labeled (printed)
side facing up.
12 cm disc guide
8 cm disc
guide
Disc tray
NOTE:
• Do not move the DVD-A11 while a disc is playing.
Doing so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
Power button
OPEN/CLOSE
button
Disc tray
NOTES:
• Be sure to turn on the power before opening and
closing the disc tray.
• Do not strike on the button with a pencil, etc.
14
(2) Loading Discs
• Pick up the disc carefully so as not to touch the
signal surface and hold it with the labeled side
facing up.
• With the disc tray fully open, set the disc in the disc
tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button.
The disc is automatically loaded.
• The disc tray can also be closed automatically to load
the disc by pressing the PLAY button.
Figure 1
Outer disc tray
12 cm disc
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If a foreign object is caught in the disc tray during
closing, simply press the OPEN/CLOSE button
again and the tray will open.
• Do not press the disc tray in by hand when the
power is off. Doing so will damage it.
• Do not place foreign objects in the disc tray.
Doing so will damage it.
8

CHANGING THE DEFAULT SETTINGS

2 Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even
if the power is turned off.
B
AL24 PLUS DENON LINK IEEE 1394
SUPER AUDIO CD DVI
¢ ON / STANDBY
£ OFF
REMOTE SENSOR
1
Turn on the power.
1
• Press the power button, the power indicator lights and the
power turns on.
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be changed
during playback.
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs default
language is set.
OSD SETUP
Use this to set the language for the default setting screen and
messages displayed on the TV screen ("PLAY", etc.).
VIDEO SETUP
2
Use this to set the DVD-A11's screen mode.
(TV aspect, TV type and AV1 video output.)
AUDIO SETUP
Use this to set the DVD-A11's audio output mode.
(Digital and LPCM output settings.)
RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs cannot
be disabled if the rating level is not recorded on the DVD, but
that it is possible to disable playback of all DVDs.
OTHER SETUP
These include special settings CAPTIONS and COMPRESSION.
Use the 0 and 1 cursor buttons to select the desired setting
item, then press the ENTER button.
Select "DISC SETUP". (See page 15.)
Select "OSD SETUP". (See page 17.)
3
Select "VIDEO SETUP". (See page 17.)
Select "AUDIO SETUP". (See page 19.)
Select "RATINGS". (See page 22.)
Select "OTHER SETUP" (See page 23.)
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
OPEN /
1
POWER NTSC / PAL CLOSE
ON OFF
PROG / DIR
1 2 3
CLEAR
4 5 6
SRS.TS
7 8 9
CALL RETURN
0 +10
TOP MENU DISPLAY
T. MENU DISP.
PLAY STOP
1 2 8 9
3
ENTER
STILL / PAUSE
3 6 7
OPEN / CLOSE MODE SET UP PLAY
5
MODE SELECT
MENU
STILL /
STOP
PAUSE
PUSH ENTER
SKIP SLOW / SEARCH
DVD-A11
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT A-B RANDOM MARKER
2
SETUP DIMMER PIC.ADJ
ZOOM PAGE
Light
Main unit Remote control unit
SETUP
Remote control unit
D I SC SE TUP
D I AL OG
SUBT I TL E
D I SC MENUS
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
ENTER
Remote control unit Remote control unit
POWER
ON
ENGL I SH
OF F
ENGL I SH