Reference Waveforms; To Save A Waveform To A Reference Waveform Location - Agilent Technologies InfiniiVision 4000 X-Series User Manual

Analog channel or math waveforms can be saved to one of four reference
waveform locations in the oscilloscope. Then, a reference waveform can be
displayed and compared against other waveforms. One reference waveform
can be displayed at a time.
When the multiplexed knobs are assigned to reference waveforms (this
happens when you press the [Ref] key and the LED to the left of it is lit),
you can use the knobs to scale and position reference waveforms. There is
also a skew adjustment for reference waveforms. Reference waveform
scale, offset, and skew information can optionally be included on the
oscilloscope display.
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. You can recall a reference
waveform file from a USB storage device into one of the reference
waveform locations.

To save a waveform to a reference waveform location

1 Press the [Ref] key to turn on reference waveforms.
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
5

Reference Waveforms

To save a waveform to a reference waveform location
To display a reference waveform
To scale and position reference waveforms
To adjust reference waveform skew
To display reference waveform information
To save/recall reference waveform files to/from a USB storage
device 122
s1
119
120
121
122
122
119