To Display Reference Waveform Information; To Save/Recall Reference Waveform Files To/From A Usb Storage Device - Agilent Technologies InfiniiVision 2000 X-Series User Manual

5
Reference Waveforms
1 Display the desired reference waveform (see
2 Press the Skew softkey and turn the Entry knob to adjust the reference

To display reference waveform information

1 Press the [Ref] key to turn on reference waveforms.
2 In the Reference Waveform Menu, press the Options softkey.
3 In the Reference Waveform Options Menu, press the Display Info softkey
4 Press the Transparent softkey to enable or disable transparent

To save/recall reference waveform files to/from a USB storage device

Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See
files to a USB storage device"
You can recall a reference waveform file from a USB storage device into
one of the reference waveform locations. See
files from a USB storage device"
80
waveform" on page 78).
waveform skew.
to enable or disable reference waveform information on the oscilloscope
display.
information backgrounds.
This setting is also used for other oscilloscope information on the
display, like mask test statistics, etc.
on page 225.
on page 228.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"To display a reference
"To save reference waveform
"To recall reference waveform