Network Settings Required To Use Wsd Scanner; Ethernet - Ricoh SP 5200S Operating Instructions Manual

Network Settings Required to Use WSD
Scanner
This section lists the network settings required for using WSD Scanner function.
• These settings should be made by the administrator, or with the advice of the administrator.

Ethernet

This section lists the settings required for using WSD Scanner function with an Ethernet connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Address
Autoconfiguration
DNS Configuration
DDNS Configuration
IPsec
Domain Name
WINS Configuration
Effective Protocol
NCP Delivery Protocol
NW Frame Type
SMB Computer Name
SMB Work Group

Network Settings Required to Use WSD Scanner

Setting Requirements
Necessary
As required
As required
As required
As required
As required
As required
As required
As required
As required
Necessary
As required
As required
As required
As required
2
101