Ricoh SP 5200S Operating Instructions Manual page 223

Message
Started.
stopped
success key received
success but invalid key
supplicant started
supplicant unbound
terminated.
Terminated.
There is problem in dhcp server operation.
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print
server name and password are correct.
trap account is unavailable.
unauthenticated
Updated (option name)(value) via DHCPv6
Server
usbd is disabled.
Problem and solutions
The bonjour (rendezvous) function has started.
The supplicant has just stopped.
The supplicant received the EAP-Success key.
The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
The supplicant has just started.
The supplicant is not connected to the unbound
access point.
The IKE service has stopped because no
configurations for manual SA or IKE exist.
The bonjour (rendezvous) function is disabled.
There is a problem with the DHCP server.
If multiple DHCP servers are active on the
network, check that they are assigning unique IP
addresses to each machine.
Login to the file server failed when the print server
was online. The print server is not registered or a
password is specified. Register the print server
without specifying a password.
v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the machine.
The authentication failed. The supplicant was
denied access to the access point, or was not
authenticated.
The parameter obtained from the DHCP server
has been updated.
Plug and Play is unavailable because the
machine is in Security Mode. Enable USBD in
Security Mode.
Message List
4
221