Ricoh SP 5200S Operating Instructions Manual page 255

8. Press [Change] under "Fax Destination".
9. Enter the new destination, and then press [OK].
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.229 "Registering Names"
To change the IP-Fax Destination
This section describes how to change a registered IP-Fax destination.
1. Press [Change] under "Fax Destination".
2. Enter the new destination, and then press [OK].
To change the protocol
This section describes how to select the protocol.
1. Press [Select Line].
2. Select [H.323] or [SIP].
3. Press [OK].
To program the SUB Code
This section describes how to program the SUB Code.
1. Press [Adv. Features], and then press [SUB Code].
Fax Destination
5
253