Ricoh SP 5200S Operating Instructions Manual page 89

Menu
Interface Settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If both Ethernet and wireless
LAN are connected, the selected interface takes precedence.
• SMTP Server and Fax E-mail Account must be specified in order to send Internet Fax.
• When POP before SMTP is set to [On], you must also make settings for Reception Protocol and
POP3 / IMAP4 Settings.
• When SMTP Authentication is set to [On], you must also make setting for Administrator's E-mail
Address.
• POP3 / IMAP4 Settings, E-mail Communication Port, and Fax E-mail Account must be specified in
order to receive Internet Fax.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.36 "Interface Settings"
User Tool
IEEE 802.1X Authentication for
Ethernet
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3 / IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
E-mail Reception Interval
Max. Reception E-mail Size
E-mail Storage in Server
Program / Change / Delete E-
mail Message
Fax E-mail Account
Network Settings Required to Use Internet Fax
Setting Requirements
As required
Necessary
As required
As required
As required
As required
As required
Necessary
As required
As required
As required
As required
Necessary
2
87