Connecting The Machine To A Telephone Line And Telephone - Ricoh SP 5200S Operating Instructions Manual

2. Connecting the Machine
Connecting the Machine to a Telephone Line
and Telephone
This section describes how to connect the machine to the telephone lines.
2
• Make sure the connector is the correct type before you start.
To connect the machine to a telephone line, use a snap-in modular type connector.
1. Connect a telephone line cord to the G3 interface unit connector (LINE).
2. If using an external telephone, connect the telephone to the external telephone connector
(TEL).
• After connecting the machine to the telephone line, specify the country code, telephone line type,
and fax information. For details, see "Initial Settings", Facsimile Reference.
• If you are using an external telephone, specify the reception mode. For details about specifying the
reception mode, "Reception Settings", Facsimile Reference.
• If your telephone has functions that are not compatible with this machine, those functions cannot be
used.
118
CFL017
CFL018