Registering A Protection Code To A Group User - Ricoh SP 5200S Operating Instructions Manual

7. Press [Protection].
8. Press [Destination] or [Sender] under "Use Name as".
Both [Destination] and [Sender] can be selected at the same time.
9. Press [Folder Destination] or [Sender] under "Protection Object".
10. Press [Change] under "Protection Code".
11. Enter a protection code using the number keys, and then press the [ ] key.
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• Specify a protection code of up to eight digits. You can also specify "Protection" without specifying
a protection code.
• To change the protection code settings, repeat step 8 to 11.

Registering a Protection Code to a Group User

This section describes how to register a Protection Code to a Group User.
1. Press the [User Tools/Counter] key.
Registering a Protection Code
5
291