Ricoh SP 5200S Operating Instructions Manual page 48

1. System Settings
Enter the password using up to 128 characters.
Spaces cannot be entered.
• Encryption
1
Select Encryption as follows:
[Auto]
Use if the authentication method is PLAIN, LOGIN, CRAM-MD5, or DIGEST-MD5.
[On]
Use if the authentication method is CRAM-MD5 or DIGEST-MD5.
[Off]
Use if the authentication method is PLAIN or LOGIN.
POP before SMTP
Specify POP authentication (POP before SMTP).
When sending e-mail to an SMTP server, you can enhance the SMTP server security level by
connecting to the POP server for authentication.
Default: [Off]
If you set POP before SMTP to [On], specify the waiting time after authentication, user name, e-
mail address, and password.
• Wait Time after Authent.
Default: [300 msec.]
Specify [Wait Time after Authent.] from zero to 10,000 milliseconds, in increments of one
millisecond.
• User Name
Enter the user name using up to 191 characters. Spaces cannot be entered.
• E-mail Address
Enter the E-mail Address using up to 128 characters. Spaces cannot be entered.
• Password
Enter the password using up to 128 characters. Spaces cannot be entered.
To enable POP server authentication before sending e-mail via the SMTP server, set [POP before
SMTP] to [On]. E-mail is sent to the SMTP server after the time specified for [Wait Time after
Authent.] has elapsed.
If you select [On], enter server name in POP3/IMAP4 Settings. Also, check POP3 port number in
E-mail Communication Port.
Reception Protocol
Specify the Reception Protocol for receiving Internet Fax.
Default: [POP3]
46