Prnlog; Rhpp - Ricoh SP 5200S Operating Instructions Manual

View settings
msh> pathmtu
Configuration
msh> pathmtu {on|off}
• The default is "on".
• If the MTU size of the sent data is larger than the router's MTU, the router will declare it
impassable, and communication will fail. If this happens, setting "pathmtu" to "on" optimizes
the MTU size and prevents data output failure.
• Depending on the environment, information might not be obtained from the router, and
communication will fail. If this happens, set "pathmtu" to "off".

prnlog

Use the "prnlog" command to obtain printer log information.
Print logs display
msh> prnlog
• Display previous print jobs.
msh> prnlog "ID Number"
• Specify the ID number of the displayed print log information to display additional details
about a print job.
• p.204 "Understanding the Displayed Information"

rhpp

Use the "rhpp" command to view and configure RHPP settings.
View settings
msh> rhpp
Changing rhpp port number
msh> rhpp port [1024-65535]
• The default is 59100.
Setting timeout
msh> rhpp timeout [30-65535]
• The default is 300 seconds.
Remote Maintenance Using telnet
4
171