Deleting A User Code - Ricoh SP 5200S Operating Instructions Manual

5. Check that [Program / Change] is selected.
6. Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys. You can search by the
registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.
7. Press [Auth. Info].
8. Press [Change], and then enter the new user code using the number keys.
9. Press the [ ] key.
10. To change the available functions, press [ Next] twice.
11. Press the key to select the functions to enable them.
Press the key to highlight it, and then the function is enabled. To cancel a selection, press the
highlighted key.
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.229 "Registering Names"

Deleting a User Code

This section describes how to delete a user code.
• After clearing the user code, the counter is automatically cleared.
1. Press the [User Tools/Counter] key.
Authentication Information
237
5