Status; Syslog; Upnp - Ricoh SP 5200S Operating Instructions Manual

4. Monitoring and Configuring the Machine
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
Deleting open key for ssh/sftp communication
msh> ssh delkey
4
• If you do not specify a character string, current setting is displayed.
• ssh can be used only with sftp.

status

Use the "status" command to display the printer status.
View messages
msh> status
• p.196 "Getting Machine Information over the Network"

syslog

Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog
• p.211 "Message List"

upnp

Use the "upnp" command to display and configure the universal plug and play.
Public URL display
msh> upnp url
184