Ricoh SP 5200S Operating Instructions Manual page 272

5. Registering Addresses and Users for Facsimile/Scanner Functions
14. Enter the port number using the number keys, and then press the [ ] key.
You can enter 1 to 65535.
15. Press [Connection Test] to check the path is set correctly.
16. Press [Exit].
If the connection test fails, check the settings, and then try again.
17. Press [Auth. Info], and then press [ Next].
5
18. Press [Specify Other Auth. Info] on the right side of "Folder Authentication".
When [Do not Specify] is selected, the FTP User Name and FTP Password that you have specified
in "Default User Name / Password (Send)" of File Transfer settings applies. For details, see "File
Transfer".
19. Press [Change] under "Login User Name".
20. Enter the login user name, and then press [OK].
21. Press [Change] under "Login Password".
22. Enter the password, and then press [OK].
23. Enter the password again to confirm, and then press [OK].
24. Press [OK].
25. Press [Exit].
26. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• You can enter up to 64 characters for the user name.
• You can enter up to 64 characters for the password.
• You can enter a server name using up to 64 characters.
• If User Authentication is specified, contact your administrator.
• p.44 "File Transfer"
270