Registering An Ncp Folder - Ricoh SP 5200S Operating Instructions Manual

2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose folder you want to delete.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-
Fax destination.
7. Press [Folder].
8. Press the protocol which is not currently selected.
A confirmation message appears.
9. Press [Yes].
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• To delete a name entirely, see "Registering Names".
• p.229 "Registering Names"

Registering an NCP Folder

This section describes how to register an NCP folder.
1. Press the [User Tools/Counter] key.
Registering Folders
5
273