Tray Paper Settings - Ricoh SP 5200S Operating Instructions Manual

Tray Paper Settings

This section describes the user tools in the Tray Paper Settings menu under System Settings.
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a
misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Tray 1
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 1 are as follows:
[Auto Detect], A4 , A5 , A5 , A6 , B5 JIS , B6 JIS , C5 Env , C6 Env , DL Env ,
1 1
8 / × 14 , 8 / × 13 , 8
2 2
1 1 1
5 / × 8 / , 4 /
2 2
Default: [Auto Detect]
You can specify a custom size of between 140.0 356.0 mm (5.52 14.01 inches) vertically, and
between 98.0 216.0 mm (3.86 8.50 inches) horizontally.
For details about auto detect paper size, see "Recommended Paper Sizes and Types", About This
Machine.
Tray Paper Size: Tray 2 4 (when the paper feed unit or paper feed unit with casters is
installed)
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 2 4 are as follows:
[Auto Detect], A4 , A5 , B5 JIS , B6 JIS , C5 Env , C6 Env , DL Env ,
1 1
8 / × 14 , 8 / × 13 , 8
2 2
1 1 1
5 / × 8 / , 4 /
2 2
Default: [Auto Detect]
1 1
/ × 11 , 8 /
2
1 7 1
× 9 / , 3 / × 7 /
8 2 8 2
1 1
/ × 11 , 8 /
2
1 7 1
× 9 / , 3 / × 7 /
8 2 8 2
1
× 13 , 8 × 13 , 7 /
4 4
, 16K , [Custom Size]
1
× 13 , 8 × 13 , 7 /
4 4
, 16K , [Custom Size]
Tray Paper Settings
1 1 1
× 10 / , 5 / × 8 /
2 2 2
1
× 10 / ,
2
1
,
27