Ricoh SP 5200S Operating Instructions Manual page 93

Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If both Ethernet and wireless
LAN are connected, the selected interface takes precedence.
• When POP before SMTP is set to [On], you must also make settings for Reception Protocol and
POP3 / IMAP4 Settings.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.36 "Interface Settings"
• p.44 "File Transfer"
User Tool
Permit SSL / TLS
Communication
Host Name
IEEE 802.1X Authentication for
Ethernet
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3 / IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program / Change / Delete E-
mail Message
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings Required to Use E-mail Function
Setting Requirements
As required
As required
As required
Necessary
As required
As required
As required
As required
As required
As required
As required
As required
As required
2
91