Wireless Lan - Ricoh SP 5200S Operating Instructions Manual

2. Connecting the Machine
Menu
Interface Settings/Network
Interface Settings/Network
2
Interface Settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If both Ethernet and wireless
LAN are connected, the selected interface takes precedence.
• If Delivery Option is set to [On], check that IPv4 Address is specified.
• p.36 "Interface Settings"
• p.44 "File Transfer"

Wireless LAN

This section lists the settings required for delivering data to the network with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
98
User Tool
Permit SSL / TLS
Communication
Host Name
IEEE 802.1X Authentication for
Ethernet
Delivery Option
Fax RX File Transmission
Scanner Resend Interval Time
Number of Scanner Resends
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
Setting Requirements
As required
As required
As required
Necessary
As required
As required
As required
Setting Requirements
Necessary
As required
As required
As required