Settings Required To Use The Network Delivery Scanner - Ricoh SGC 1506 Operating Instructions Manual

Settings Required to Use the Network Delivery Scanner

This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see "Interface Setting" and "File
Transfer".
Menu
Interface Setting/Network Machine IPv4 Address
Interface Setting/Network IPv4 Gateway Address
Interface Setting/Network DNS Configuration
Interface Setting/Network DDNS Configuration
Interface Setting/Network Domain
Interface Setting/Network WINS Configuration
Interface Setting/Network Effective Protocol
Interface Setting/Network Ethernet Speed
Interface Setting/Network LAN Type
Interface Setting/Network Permit SNMPv3 Communictn.
Interface Setting/Network Permit SSL/TLS Comm.
Interface Setting/Network Host Name
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.56 "Interface Settings"
p.65 "File Transfer"
User Tool
Delivery Option
Fax RX File Transmission
Scanner Resend Time
Scanner Resend Setting
Network Settings
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
As required
Necessary
As required
As required
As required
As required
As required
As required
As required
1
29