Ricoh SP 5200S Operating Instructions Manual page 250

5. Registering Addresses and Users for Facsimile/Scanner Functions
• To change the name, key display and title, see "Registering Names".
• p.229 "Registering Names"
To change the fax number
This section describes how to change the fax number.
1. Press [Change] under "Fax Destination".
2. Enter the new fax number using the number keys, and then press [OK].
To program the SUB Code
5
This section describes how to program the SUB Code.
1. Press [Adv. Features], and then press [SUB Code].
2. Press [Change] under "TX SUB Code".
3. Enter the new SUB Code using the number keys, and then press [OK].
4. To change the password, press [Change] under "Password (SID)".
5. Enter the new password using the number keys, and then press [OK].
6. Press [OK].
To program the SEP Code
This section describes how to program the SEP Code.
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter the new SEP Code using the number keys, and then press [OK].
4. To change the password, press [Change] under "Password (PWD)".
5. Enter the new password using the number keys, and then press [OK].
6. Press [OK].
To set the International TX Mode
This section describes how to set the International TX Mode.
1. Press [Change] under "International TX Mode".
248