1011: Zisa-Evt-Memory-Alloc-Failure - HP T9576G06 Management Manual

IPX/SPX Subagent (G-Series)
Effect. The subagent cannot retrieve information from the IPXPROTO process.
Recovery. Correcting the situation depends on the reason for the disconnection:
Change Reason
operatorrequest
invalid-processname
incorrect-processname
resource-problem
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001010 Object

1011: ZISA-EVT-MEMORY-ALLOC-FAILURE

The subagent could not allocate the memory required for an operation.
Unconditional Tokens
ZISA-TKN-SUBAGENT
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-TXFAULT-TYPE
ZEMS-TKN-CONTENT-USER
ZISA-TKN-MEM-ALLOC-SIZE
Conditional Tokens
None
Message Text
Transient Fault
number: <2>, fault type:
ZISA-TKN-SUBAGENT
identifies the subject of the event, always an IPX/SPX Subagent process. The
DDL heading of this token ("IPX/SPX-SNMP-subagent-process") and the token's
value (the name of the subagent process) are inserted in the message text.
Recovery
No action is required because the stoppage was deliberate.
Resubmit the Set request using the correct syntax for a
NonStop Kernel process name.
Resubmit the Set request using the name of an existing
IPXPROTO process.
Try to set the value of tdmNwSaIpxProtoState to
connected. If the operation fails, refer to the IPX/SPX
Configuration and Management Manual for ideas about how
to handle unavailable IPXPROTO processes.
unavailable ipxproto-resource-object -
$ZNV0, event number: ipxproto-unavailable,
cause: incorrect-processname, previous
state: connected, current state:
disconnected, user content: undefined
IPX/SPX-SNMP-subagent-process - <1>, event
SNMP Configuration and Management Manual—424777-006
1011: ZISA-EVT-MEMORY-ALLOC-FAILURE
Value
<1> IPX/SPX subagent process
name
<2> ZISA-EVT-MEMORY-ALLOC-
FAILURE
<3> ZISA-VAL-TF-MEM
<4> undefined (null)
ZISA-TNM-MEM-ALLOC-SIZE
<3>, user content:
13-70
<4>