Event Message Descriptions; Table 14-10. Zems Tokens In Zesa Event Messages - HP T9576G06 Management Manual

Ethernet Subagent

Table 14-10. ZEMS Tokens in ZESA Event Messages

Token
ZEMS-TKN-CONTENT-STANDARD
ZEMS-TKN-CONTENT-USER
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-SUBJECT-MARK
ZEMS-TKN-SUPPRESS-DISPLAY
ZEMS-TKN-CHANGE-REASON
ZEMS-TKN-STATE-CURRENT
ZEMS-TKN-STATE-PREVIOUS
ZEMS-TKN-TXFAULT-TYPE

Event Message Descriptions

ZESA event messages are described in order by event number. Each description
includes:
Token lists. Tokens listed as "unconditional" always appear in the event message.
Tokens listed as "conditional" are included only under described conditions.
Tokens not defined by ZESA are listed only if they contain information that appears
in the printed message text or if they contain ZESA-defined values.
Event message text. The event message text illustrates what is generated when
the contents of the event message are displayed according to the message
template defined in the file ZESATMPL.
<n> shows where text appears that is derived from a token in the token list.
For a complete specification of the message, examine the message template
source file SESATMPL. The message templates for standard formatted messages
are defined in the EMS Manual.
Descriptions of listed tokens or values.
SNMP Configuration and Management Manual—424777-006
Contents
Type of standard event.
Type of user-defined event (for the Ethernet
Subagent, the value is always ZEMS-VAL-NULL).
Event number.
Event subject marker.
Display/do not display event flag.
Reason for object state change.
Current object state; private enumerations:
ZESA-VAL-STATE-CONNECTED
ZESA-VAL-STATE-DISCONNECTED
ZESA-VAL-STATE-ENABLED
ZESA-VAL-STATE-DISABLED
Previous object state; private enumerations:
ZESA-VAL-STATE-CONNECTED
ZESA-VAL-STATE-DISCONNECTED
ZESA-VAL-STATE-ENABLED
ZESA-VAL-STATE-DISABLED
Reason for transient fault; private enumerations:
ZESA-VAL-TF-SRL
ZESA-VAL-TF-TAKEOVER
14-33
Event Message Descriptions