Table 12-1. Trap Multiplexer Configuration Options - HP T9576G06 Management Manual

Trap Multiplexer Subagent/Manager
The Trap Multiplexer attributes that can be controlled by setting MIB object values are
reinitialized when the Trap Multiplexer is restarted to default values or values specified
in startup parameters.
Refer to Starting and Stopping the Trap Multiplexer
configuration using RUN startup parameters. Refer to subsequent subsections for each
MIB group for information on settable MIB objects.

Table 12-1. Trap Multiplexer Configuration Options

Configuration Attribute
SNMP agent process
name
Trap Multiplexer process
Priority
Backup process
creation
Backup process
takeover
Run independent of
SNMP agent
Interval between
connection attempts
Trap handling
TCP/IP processes to
monitor for traps
EMS collector
process to
receive events
generated
UDP port to bind to
Tracing
To a terminal or
Spooler
destination
To a disk file
RUN
Startup
Parameter
-a
-n
-b
-x
-k
-t
-c
-p
-o
-l
SNMP Configuration and Management Manual—424777-006
on page 12-6 for information on
Settable MIB Object
Name (Group Name)
ztmxProcPri
(ztmxProcess group)
ztmxSwitchToBackupNow
(ztmxProcess group)
ztmxProcKeepAliveTimer
zsmpTcpIpName
zsmpTcpIpAddr
12- 5
Configuration
Default Behavior
$ZSNMP on the
same system as the
Trap Multiplexer
specified at startup.
Priority is 145.
No backup process.
Backup process
takes over if primary
process fails.
TrapMux starts being
associated with the
agent.
Every 15 minutes
$ZTC0.
$0 on the same
system as the Trap
Multiplexer specified
at startup.
Port 162.
No tracing.
No tracing.