Converting Events To Traps - HP T9576G06 Management Manual

Snmp configuration and management manual
Table of Contents

Advertisement

TCP/IP Subagent
Cause. The LM_Get_Statistics_ function returned an error.
Effect. The ifTable values obtained through the STATS command are not current until
the timer expires, the same ZLANMSRL call is retried, and a response obtained.
Recovery. Generally, this condition is transient, and no corrective action is necessary.
If the problem persists, contact your service provider and provide all relevant
information as follows:
Descriptions of the problem and accompanying symptoms
Details from the message or messages generated
Supporting documentation such as Event Management Service (EMS) logs
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
Sample Message
97-04-08 11:31:35 \NOVA.$ZTSA

Converting Events to Traps

Any process that generates events, including the TCP/IP Subagent, can have its
events translated into traps by the EMS Trap Subagent. The EMS Subagent uses an
event filter known as a "routing distributor" to determine where to route trap messages.
The filter contains a destination statement that identifies the SNMP agent as the
routing destination. The filter can also contain specifications for selecting events to
convert into traps. Refer to
Section 9, EMS Trap
SNMP Configuration and Management Manual—424777-006
TANDEM.TCPIPSA.G02
Fault
TCP/IP-SNMP-Subagent -
\NOVA.$ZTSA:3693561,
event number: lmPIFgetstats-error,
fault type: PIF-stats-cmd-not-completed,
user content: undefined
Subagent, for more information.
8 -109
Converting Events to Traps
001041
Transient

Advertisement

Table of Contents
loading

This manual is also suitable for:

T9576h01

Table of Contents