HP T9576G06 Management Manual page 255

TCP/IP Subagent
Table 8-3. Private (ZTSA) MIB Objects Supported by the TCP/IP
Subagent (page 5 of 7)
Object and Attributes
ztsaStatsCache
1.3.6.1.4.1.169.3.202.19
read-write
INTEGER (0..32000)
ztsaStatusCache
1.3.6.1.4.1.169.3.202.20
read-write
INTEGER (0..32000)
ztsaInfoCache
1.3.6.1.4.1.169.3.202.21
read-write
INTEGER (0..32000)
ztsaTcpIpProcess
1.3.6.1.4.1.169.3.202.22
read-write
DisplayString
(SIZE (0..15))
* See State Object/Resource Object Pairs
control or indicate the internal processing state of processes used by the subagent.
Definition
The cache update
interval (in seconds) for
objects updated using
the SPI STATISTICS
command.
The cache update
interval (in seconds) for
SPI STATUS command
based objects.
The cache update
interval (in seconds) for
SPI INFO command
based objects.
The name of the TCP/IP
process monitored by
the subagent.
on page 8-28 for information about TCP/IP Subagent objects that
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
A value in the range 0 to 32000
specified for the -stats startup
parameter. The default is 60
seconds. After startup, the value
can be set by an SNMP manager.
Value 0 disables cache timing
such that updates occur to objects
derived from STATISTICS only
when ztsaRefreshNow is set to
forceDynamicRefresh (1).
A value in the range 0 to 32000
specified for the -status startup
parameter. The default is 90
seconds. After startup, the value
can be set by an SNMP manager.
Value 0 disables cache timing
such that updates occur to objects
derived from STATUS only when
ztsaRefreshNow is set to
forceDynamicRefresh (1).
A value in the range 0 to 32000
specified for the -info startup
parameter. The default is 180
seconds. After startup, the value
can be set by an SNMP manager.
Value 0 disables cache timing
such that updates occur to objects
derived from INFO only when
ztsaRefreshNow is set to
forceDynamicRefresh (1).
$tcpip-process specified for
the -t startup parameter. The
default is $ZTC0. After startup,
the value can be set by an SNMP
manager.
8- 25
ZTSA MIB Objects