Configuration; Table 11-1. Host Resources Subagent Configuration Options - HP T9576G06 Management Manual

Host Resources Subagent

Configuration

You can configure the behavior of the Host Resources Subagent at startup time or
from an SNMP manager after startup.
All subagent attributes that can be controlled by setting MIB object values are
reinitialized when the subagent is restarted to default values or values specified in
startup parameters.
Refer to Starting and Stopping the Subagent
configuration using RUN startup parameters. Refer to subsequent subsections on
individual MIB groups for information on settable MIB objects.
Table 11-1. Host Resources Subagent Configuration Options (page 1 of 3)
Subagent Attribute
SNMP agent process
name
Subagent process
Priority
Backup process
creation
Backup process
takeover
MIB value refresh rate
Hardware configuration
objects
Hardware status and
statistics objects
Software objects
MIB values maintained
RUN
Startup
Para-
meter
-a
-n
-b
-s
-d
-s
-d
SNMP Configuration and Management Manual—424777-006
Table 11-1 summarizes the available options.
on page 11-12 for information on
Settable MIB Object
Name (Group Name)
zhrmSaPri
(zhrmSaProcess group)
zhrmSwitchToBackupNow
(zhrmSaProcess group)
zhrmStableRefreshNow
(zhrmRefresh group)
zhrmDynamRefreshNow
(zhrm Refresh group)
zhrmStableRefreshNow
(zhrmRefresh group)
zhrmDynamRefreshNow
(zhrm Refresh group)
11 -10
Configuration
Default Behavior
$ZSNMP on the same
system as the
subagent specified at
startup.
Priority is 145.
No backup process.
Backup process takes
over if primary process
fails.
Values refreshed every
24 hours.
Values refreshed every
10 minutes.
Values refreshed
whenever hardware
object values are
refreshed.