Memory (Ram) Requirements; Installing The Data Protector Integration; Installation - HP Data Protector A.06.11 Integration Manual

Machine
Operations Manager
Server
Operations Manager
Managed Node

Memory (RAM) requirements

There are no specific requirements for RAM on the Operations Manager Server or
managed nodes, beyond the requirements of Operations Manager and Data Protector.

Installing the Data Protector Integration

The Data Protector Integration is delivered in the dpspi-06.11.0000.msi MSI
package used to install the integration and console onto the Operations Manager
Server. This installs all components required for the management server and the
managed nodes on the management server system. Agent software and configuration
data for these agents is then distributed by the Operations Manager administrator
to the managed nodes using Operations Manager.
NOTE:
In the case of a cluster setup, install the integration on all cluster nodes that are
designated to run Operations Manager. Install on first node, and after the installation
finishes successfully, start it on the next node. Repeat this until all designated nodes
are installed. The installation of the first cluster node differs from the installation of
subsequent nodes.

Installation

To install the software on the management server, run the dpspi-06.11.0000.msi
executable file.
Operations Operating System
Manager
Version
7.5/8.0/8.1 Windows
7.5/8.0/8.1 HP-UX, Solaris, Linux, Windows suppor-
ted as managed node and DP cell
server
Integration guide for HP Operations Manager for Windows
Total
15 MB
2 MB
27